Console House 10 Mode Istruzioni per gli Interventi Scaricare il pdf (Pagina 10)

- In the event that the alarm has been activated, the menu keys and

the arrow keys are locked out. You must silence the alarm using

the OFF, DAY, NIGHT, or AWAY keys.

Now that you know how to disarm the system, here's how to arm the

security system. The security menu is used to arm and disarm the

security system. To enter the security menu, from the top-level

display, press the 2 key on the console keypad. The console should

display:

0=OFF 1=DAY 2=NIGHT

3=AWAY 4=VACATION

↓

5=DAY INST 6=NIGHT DLY

8=BYPASS 9=RESTORE

↑

0 = OFF

The OFF key disarms the security system, resets the fire and

emergency alarms, and silences all sirens and sounders.

1 = DAY

The DAY mode is intended for use when someone will occupy the

house or business that is being protected. In the Day mode, the

perimeter zones (doors and windows) are armed; however, interior

motion detectors and interior traps are not armed so that you may

move about freely inside. In the Day mode, there will be an Entry

Delay on the Entry-Exit zone, so that someone arriving can turn off

the alarm before it sounds.

2 = NIGHT

The NIGHT mode is used when you are asleep and everyone in your

household is at home. In the Night mode, your doors, windows, and

non-sleeping area (i.e. downstairs) motion detectors are armed. In the

Night mode, there is no entry delay. The alarm system sounder will be

activated immediately if any door, window, or non-sleeping area

(motion detector) is tripped.

Arming the

Security System

10 Omni Owner's Manual

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 135 136

Nessun commento

Console House 10 Mode Istruzioni per gli Interventi Pagina 10